LOCKING ASSEMBLY RFN 7014 APPLICATION IN HEAVY-DUTY INDUSTRY

Ngày đăng: 06/09/2023

1. Find out what is RfN 7014 shaft locking joint?

Locking Assembly RfN 7014 are friction locked shaft-hub connections manufactured to the highest quality standards. Locking Assembly RfN 7014 are suitable for precision fastening of all types of shafts such as: toothed gears, running wheels and sprockets, levers, cams, belt and brake discs, sliding gears, couplings or flanges, on shaft and shaft. Compared to external clamp connections locking assemblies are installed between the shaft and hub. By tightening the clamping screws, the inner and outer rings press themselves against the contact surfaces of the connected parts, thus creating a friction-fit pressed connection. This allows not only peak torque but also axial and radial loads as well as bending loads to be transmitted reliably.

2. Structural features of Ringfeder RfN 7014 shaft locking joint:

- Locking Assembly RfN 7014 joint is manufactured by Ringfeder/Germany
- This double taper locking device is similar to type 7012 but has better centering ability
- The locking joint is self-centering and has no axial displacement
- Inner diameter d: 60 - 300mm
- Outside diameter D: 100 - 390mm
- Overall length L: 60 - 156mm
- Torque T: 4130 - 245000Nm
- Peripheral forces can be transmitted to a large extent due to the flat, long cone shape
- RfN 7014 is easy to install and remove

ANY QUESTIONS OR ASKING FOR A PRICE, PEASE CONTACT:
BUSINESS DEPARTMENT
HOTLINE: 0906 955 057 – EMAIL: INFO@DHP-CORP.COM.VN

See more post "Locking Assembly Ringfeder RfN 7014 in hydraulic pump system"

3. RfN 7014 shaft locking joint for heavy industry applications:

Locking Assembly RfN 7014 has a double taper similar to the RfN 7012 type, designed for extremely high torque transmission. Unlike the Locking Assembly RfN 7012, the RfN 7014 offers good centering due to its relatively long design so it is not necessary to pre-center the center section. Its design also offers different inside and outside diameter ratios, so it is not interchangeable with other RINGFEDER types. Available in sizes from 70 to 300 mm. Product Features Large transferable peripheral force – due to its long and flat cone, maximum torque and axial force can be transmitted with one RfN 7014. Maximum reliability – thanks to flat cones and relatively wide structure (large guide length), the very center of the Locking Assembly RfN 7014. During the installation of the Locker, the shaft and shaft remain in position with each other. The shaft and shaft are pressure-loaded, providing greater safety than the 3-section version.
Locking Assembly RfN 7014 is used in heavy industries: Heavy pulleys, Construction of heavy machinery, Couplings, Cable sheaves, ...

ANY QUESTIONS OR ASKING FOR A PRICE, PEASE CONTACT:
BUSINESS DEPARTMENT
HOTLINE: 0906 955 057 – EMAIL: INFO@DHP-CORP.COM.VN

See more post "Locking Assembly RfN 7014 application in packing line"

4. How to buy shaft lock joint RfN 7014 Ringfeder Germany:

Dai Hong Phat is the number 1 supplier of Ringfeder Germany shaft locking joints in Vietnam. As an authorized distributor of Ringfeder Germany in Vietnam, Laos, Cambodia, Philippines, etc. With the motto "Sales give trust", Dai Hong Phat always ensures to provide genuine, high quality products at competitive prices. . In addition, we also have a dedicated support team that is always ready to assist customers 24/7.
To buy the RfN 7014 shaft lock, please contact the hotline: 0906 955 057 for advice and quotation.

ANY QUESTIONS OR ASKING FOR A PRICE, PEASE CONTACT:
BUSINESS DEPARTMENT
HOTLINE: 0906 955 057 – EMAIL: INFO@DHP-CORP.COM.VN

See more post "Locking Assembly RfN 7014 application medial technology"